Skip to content

CMMSedge IoT

Monitor critical assets in real time

Connect sensors to your equipment, get instant alarms, and turn every alert into a work order, from detection to repair, in one platform.

Book a Demo
CMMSedge IoT web dashboard with alarms and device status, and the mobile app showing grid voltages and fuel level

Built for the equipment you can't afford to lose

Power generators

UPS & battery banks

Lithium (LiFePO4) batteries

Precision air conditioning

Capacitor banks

Circuit reclosers

…and any other asset with a Modbus or SNMP interface.

Sound familiar?

Without real-time monitoring, critical equipment fails without warning.

Alarms arrive too late

You only find out after the equipment has already failed.

Critical assets unprotected

No one is watching them between inspections.

No visibility of operating conditions

Voltage, temperature and load are unknown until something breaks.

No plan when failure is near

Warnings don't turn into actions.

High corrective costs

Emergency repairs, downtime and penalties add up.

Book a Demo

How CMMSedge IoT works

Condition-based maintenance in four steps: from the sensor on your equipment to a work order in CMMShere.

Step 1

Connect

A router installed next to each asset reads its controller over Modbus or SNMP, via SIM, Ethernet or Wi-Fi.

Step 2

Transmit

Readings travel securely over a VPN to the CMMSedge IoT cloud.

Step 3

Process

Data is stored, interpreted and checked against your alarm thresholds.

Step 4

Act

See dashboards and tables in any browser, get real-time alarms, and raise work requests automatically.

How CMMSedge IoT works: assets connect over Modbus or SNMP to an on-site router, data travels over a secure VPN to the CMMSedge IoT cloud, and your team gets real-time alarms, dashboards, work requests and browser access How CMMSedge IoT works: assets connect over Modbus or SNMP to an on-site router, data travels over a secure VPN to the CMMSedge IoT cloud, and your team gets real-time alarms, dashboards, work requests and browser access

Video

See CMMSedge IoT in under two minutes

Get control of your critical equipment by combining the Internet of Things with integrated maintenance management. You don't just get alarms: you run the whole maintenance process that brings your equipment back to the right conditions.

See CMMSedge IoT in under two minutes

Core monitoring capabilities

Everything you need to watch, alert and act, in one platform.

Maintenance technician taking monitoring measurements to later log in their CMMS computerized maintenance and monitoring system

24/7 Monitoring

Operating conditions are read around the clock, with no manual rounds.

CMMSedge app showing monitored voltage and fuel level graphs

Alarms & Notifications

Thresholds trigger instant alerts by email, push and dashboard.

All Maintenance in One

Alarms, work orders and asset history live in CMMShere.

alarms in real time, whole maintenance cycle

Custom Reports

Condition history and alarm reports for audits and management.

CMMSedge IoT dashboard showing active alarms, devices online and offline, alarm severity and alarm count per device

Control Dashboard

Online and offline devices, alarm severity and trends at a glance.

maintenance technician adjusting a switch panel

Customizable

Set variables, thresholds and procedures per asset.

CMMSedge asset geo location feature

Geolocation

See every monitored asset on a map.

battery bank

Scalable

Start with a few variables and grow to hundreds of assets.

From alert to work order

1

Install & connect

Sensors on your assets

Install the router next to the asset and connect it over Modbus or SNMP.

2

Monitor in real time

Live variables

Follow your assets' variables live in dashboards, with two years of history stored.

3

Get instant alarms

Threshold crossed

When a threshold is crossed, the right people are notified right away.

4

Auto-generate the work order

Straight into CMMShere

The alarm becomes a CMMS work order with the asset, procedure and technician.

5

Restore & record

Close the loop

Close the order, keep the full history and analyse the failure.

Book a Demo

Measurable impact

What CMMSedge IoT delivers for your critical equipment.

1200%

ROI from corrective maintenance savings

24/7

Automatic monitoring with instant notifications

2 yrs

Of condition history stored on every plan

battery bank

Success story

266.2 kWh of LiFePO4 batteries monitored for a major telecom in Bolivia

A major Bolivian telecom replaced its lead-acid batteries with 266.2 kWh of lithium (LiFePO4) storage. CMMSedge IoT monitors their condition around the clock, raises alarms before problems escalate and runs the full maintenance cycle in CMMShere. The same approach works for generator sets, UPS, precision air conditioning, capacitor banks and reclosers.

Read the case study

CMMSedge IoT plans

IoT monitoring plans are separate from CMMShere subscription plans. Pick the capacity you need by the number of variables and alarms. Every plan stores two years of condition history.

Edge Lite

6

variables max.

100

alarms max.

2-year condition history

Edge Connect

18

variables max.

500

alarms max.

2-year condition history

Edge Ultra

55

variables max.

1,000

alarms max.

2-year condition history

Edge Insight

150

variables max.

3,000

alarms max.

2-year condition history

Contact us for pricing

IoT Monitoring FAQ

Answers to common questions about monitoring critical assets with CMMSedge IoT

What equipment can CMMSedge IoT monitor?

Generators, UPS and battery banks (including LiFePO4), precision air conditioning, capacitor banks, reclosers and other assets with a Modbus or SNMP interface.

What hardware do I need?

A router or gateway installed next to the asset, connected by SIM, Ethernet or Wi-Fi.

Which protocols are supported?

Modbus and SNMP.

How is the data secured?

Readings travel over a VPN from the router to the CMMSedge IoT cloud platform.

How long is condition history kept?

Two years, on every plan.

Can an alarm create a work order automatically?

Yes. Alarms feed CMMShere, so the whole cycle from alert to repair is tracked.

Can I see my assets on a map and on mobile?

Yes. You get a geolocation view, access from any browser and the mobile app.

Ready to monitor your critical assets in real time?

See how CMMSedge IoT connects your critical equipment to CMMShere, from the first alarm to the completed work order. Tell us which assets you need to monitor and we will schedule a free demo with your team:

CMMSedge IoT

Book a Demo


CMMShere logo

Book your free demo today

30 min · Live walkthrough · No commitment

CMMShere

Book your free DEMO today

Schedule your CMMShere demo