CMMSedge IoT
Monitor critical assets in real time
Connect sensors to your equipment, get instant alarms, and turn every alert into a work order, from detection to repair, in one platform.
Book a Demo
Built for the equipment you can't afford to lose
Power generators
UPS & battery banks
Lithium (LiFePO4) batteries
Precision air conditioning
Capacitor banks
Circuit reclosers
…and any other asset with a Modbus or SNMP interface.
Sound familiar?
Without real-time monitoring, critical equipment fails without warning.
Alarms arrive too late
You only find out after the equipment has already failed.
Critical assets unprotected
No one is watching them between inspections.
No visibility of operating conditions
Voltage, temperature and load are unknown until something breaks.
No plan when failure is near
Warnings don't turn into actions.
High corrective costs
Emergency repairs, downtime and penalties add up.
How CMMSedge IoT works
Condition-based maintenance in four steps: from the sensor on your equipment to a work order in CMMShere.
Step 1
Connect
A router installed next to each asset reads its controller over Modbus or SNMP, via SIM, Ethernet or Wi-Fi.
Step 2
Transmit
Readings travel securely over a VPN to the CMMSedge IoT cloud.
Step 3
Process
Data is stored, interpreted and checked against your alarm thresholds.
Step 4
Act
See dashboards and tables in any browser, get real-time alarms, and raise work requests automatically.
Video
See CMMSedge IoT in under two minutes
Get control of your critical equipment by combining the Internet of Things with integrated maintenance management. You don't just get alarms: you run the whole maintenance process that brings your equipment back to the right conditions.
Core monitoring capabilities
Everything you need to watch, alert and act, in one platform.
24/7 Monitoring
Operating conditions are read around the clock, with no manual rounds.
Alarms & Notifications
Thresholds trigger instant alerts by email, push and dashboard.
All Maintenance in One
Alarms, work orders and asset history live in CMMShere.
Custom Reports
Condition history and alarm reports for audits and management.
Control Dashboard
Online and offline devices, alarm severity and trends at a glance.
Customizable
Set variables, thresholds and procedures per asset.
Geolocation
See every monitored asset on a map.
Scalable
Start with a few variables and grow to hundreds of assets.
From alert to work order
1
Install & connect
Sensors on your assets
Install the router next to the asset and connect it over Modbus or SNMP.
2
Monitor in real time
Live variables
Follow your assets' variables live in dashboards, with two years of history stored.
3
Get instant alarms
Threshold crossed
When a threshold is crossed, the right people are notified right away.
4
Auto-generate the work order
Straight into CMMShere
The alarm becomes a CMMS work order with the asset, procedure and technician.
5
Restore & record
Close the loop
Close the order, keep the full history and analyse the failure.
Measurable impact
What CMMSedge IoT delivers for your critical equipment.
1200%
ROI from corrective maintenance savings
24/7
Automatic monitoring with instant notifications
2 yrs
Of condition history stored on every plan
Success story
266.2 kWh of LiFePO4 batteries monitored for a major telecom in Bolivia
A major Bolivian telecom replaced its lead-acid batteries with 266.2 kWh of lithium (LiFePO4) storage. CMMSedge IoT monitors their condition around the clock, raises alarms before problems escalate and runs the full maintenance cycle in CMMShere. The same approach works for generator sets, UPS, precision air conditioning, capacitor banks and reclosers.
Read the case studyCMMSedge IoT plans
IoT monitoring plans are separate from CMMShere subscription plans. Pick the capacity you need by the number of variables and alarms. Every plan stores two years of condition history.
Edge Lite
6
variables max.
100
alarms max.
2-year condition history
Edge Connect
18
variables max.
500
alarms max.
2-year condition history
Edge Ultra
55
variables max.
1,000
alarms max.
2-year condition history
Edge Insight
150
variables max.
3,000
alarms max.
2-year condition history
IoT Monitoring FAQ
Answers to common questions about monitoring critical assets with CMMSedge IoT
What equipment can CMMSedge IoT monitor?
Generators, UPS and battery banks (including LiFePO4), precision air conditioning, capacitor banks, reclosers and other assets with a Modbus or SNMP interface.
What hardware do I need?
A router or gateway installed next to the asset, connected by SIM, Ethernet or Wi-Fi.
Which protocols are supported?
Modbus and SNMP.
How is the data secured?
Readings travel over a VPN from the router to the CMMSedge IoT cloud platform.
How long is condition history kept?
Two years, on every plan.
Can an alarm create a work order automatically?
Yes. Alarms feed CMMShere, so the whole cycle from alert to repair is tracked.
Can I see my assets on a map and on mobile?
Yes. You get a geolocation view, access from any browser and the mobile app.
IoT Monitoring
Resources and related content
IoT and Data Analytics for Maintenance
Sensors and connected devices send real-time equipment data to one platform. Learn how to use IoT and analytics to prevent breakdowns…
Case Study: LiFePO4 Battery Monitoring for a Major Telecom
A major Bolivian telecom replaced lead-acid batteries with 266.2 kWh of LiFePO4 storage. See how CMMSedge IoT tracks their health…
How to Manage the Hour Meters of Our Assets?
Many organizations manage all maintenance work based on time, in hours of actual operation…